The Definitive Creative Reamping Tool

Reamper gives musicians, engineers, and producers the flexibility to easily connect guitar rigs, studio processors, pedals, and DAWs in ways typically reserved for complex studio setups. It takes the concept of reamping and signal flow much further.

With fully independent preamp and re-amp signal paths, CineMag input/output transformers, and variable impedance control, Reamper preserves the tone of your source while adapting to everything from guitars and pedals to synths and line-level studio gear. Built to professional studio standards, Reamper brings true analog integration and creative flexibility to any recording setup.

Core Applications

• Re-Amping: Instantly transform dry electric guitar or bass signals into pro recordings using your favorite tube amps.
• Silent Recording: Take any 50W/8-Ohm amp and record directly to the DAW without a loud speaker cab.
• Effects Processing: Use your pedalboard on any DAW track or add pro studio gear to any guitar chain.
• Daisy-Chain Recording: Daisy-chain two guitar amps and capture multiple distinct tones in one single take.

Key Features

• Variable Impedance Control: Match input sources easily with a range of 120kΩ to 1MΩ to ensure zero unwanted noise or distortion.
• Separate Gain Staging: Independent controls for Preamp Out and Reamp Out allow you to dial in the perfect gain for re-amping and dry signals.
• Switchable Input Stage: Change the character of your direct signal by flipping between a JFET stage (warmer, vintage vibe) and an Op-Amp (cleaner gain).
• Silent AMP-IN/THRU: Record 50W/8Ω tube amps silently without a cabinet. Connect to a cabinet via "THRU" to bypass power and impedance limits. (Note: use an Impulse Response in your DAW for accurate "amp in the room" tone).
• Lift/Ground Switch: Eliminate hum and buzz caused by ground-loop issues.

WARNING: Do not connect any bridged amplifiers to the Reamper. Do not exceed the 50W/8Ω limitation for silent recording. When using more powerful amps, you must connect an appropriate speaker load using the "THRU" connection to prevent damage to your amplifier.

Premium Components & Build

• Custom CineMag USA Transformers: Built to original Reichenbach Engineering specs to deliver the elite performance expected of prized vintage studio gear.
• Hand-Tested Quality: Encased in a rugged metal chassis with a decoupled heatsink for power soaking. Meticulously inspected and hand-tested in Austin, TX.
• 5-Year Warranty: Built for reliable, long-lasting studio performance.

Specifications

External Specs & Capabilities

• Dual-Channel Active Instrument Preamp & Re-Amp Device
• Independent Instrument Preamp And Re-Amp Signal Paths
• CineMag Transformer Isolation On Each Signal Path
• Connect Instrument, Line-Level, & Speaker-Level Signals
• Compatible With Passive And Active Instruments, Keyboards, And Pedals
• Speaker Input With Direct Through Or Built-In Power Soak For Silent Operation
• Stepless Re-Amp Output Level Control For Attenuation Or Gain
• Balanced Line-Level I/O On XLR And 1/4" Connections (No Phantom Power Required)

Internal Components

• Custom CineMag USA Transformers On Each Signal Path (Inputs & Outputs)
• Switchable JFET Discrete Or JFET Op-Amp Instrument Input Stage
• Fully Active Circuitry With Ultra-Low-Noise Design
• High-Quality Components Throughout Signal Path
• Internal Universal AC Power Supply

Performance Specs

• Channels: 2
• Maximum Instrument Input Level: +18 dBu (6 VRMS)
• Instrument Input Impedance: Variable 120kΩ To 1MΩ
• Re-Amp Output Level: Stepless Attenuation To Gain
• Speaker Power Soak: 8 Ohms, 50 Watts Max
• Balanced Line Output: True Line Level On XLR And 1/4"
• Phase-Invert & Ground/Lift: Per Channel
• Power: 90–240V AC, 50–60 Hz

Watch It in Action